615C系列II升降式刮板
引擎
- 飞轮动力-拖拉机/刮板
- 197千瓦（265马力）
- 拖拉机发动机
- 猫®3306
- 净功率- 1-2档
- 265HP
- 净动力-档位3-8
- 265HP
- 总动力- 1-2档
- 279HP
- 生
- 4.75in
- 中风
- 6in
- 位移
- 638年³
- 净功率
- 265HP
刮碗
- 刮板容量-堆积
- 17码³
- 额定负载
- 40800lb
- 容量-击中
- 14码³
- 切割深度-最大
- 15.8in
- 宽度切割-到路由器位
- 9.5in
- 离地间隙-最大
- 17.3in
- 传播深度-最大
- 16.3in
传输
- 最高速度-加载
- 27.6公里/小时
- 1向前
- 2.2英里/小时
- 2向前
- 3.6公里/小时
- 3前进
- 6.2英里/小时
- 4向前
- 10.2英里/小时
- 5前进
- 17.5英里/小时
- 6向前
- 27.6公里/小时
权重
- 总营运-空
- 56450lb
- 前轴
- 37250lb
- 后桥
- 19200lb
- 总运行负荷
- 97250lb
- 前轴重量负载
- 50010lb
- 后轴-重量负载
- 47240lb
电梯
- 长度-整体
- 146.5in
- 宽度-飞行面
- 6.89in
- 长度-飞行
- 77.7in
- 飞行间隔
- 16.22in
- 航班数量
- 18
维
- 高度-整体运输
- 141.3in
- 长度-整机
- 457in
- 宽度-整机
- 120in
- 高度-驾驶室顶部
- 127in
- 高度-刮板叶片最大值
- 19.5in
- 宽度-碗的内部
- 103in
- 宽度-后轮胎中心线
- 83.25in
- 宽度-外后轮胎
- 120in
- 拖拉机前部到前轴
- 116.75in
- 轴距
- 274.75in
- 后桥-机器的后部
- 55.9in
操舵
- 宽度- 180°转弯
- 31.5ft
- 操舵角-右
- 90度
- 操舵角-左
- 85度
- 液压输出
- 50.99加仑/分钟
服务补充容量
- 油箱
- 105加(美国)
- 曲轴箱
- 6加(美国)
- 传输
- 9.5加(美国)
- 微分
- 16加(美国)
- 最终驱动-每个
- 16加(美国)
- 冷却系统
- 17加(美国)
- 液压水库
- 42加仑(美国)
液压
- 缸内
- 5in
- 缸筒行程
- 22.6in
- 缸底孔
- 5.5in
- 缸底行程
- 26.8in
- 喷射器缸膛
- 4.3in
- 喷射器气缸行程
- 43in
- 控制电路
- 51加/分钟
- 刮板电路
- 36个加仑/分钟
- 安全阀-转向电路
- 1000.76 psi
- 补偿器设置-电梯电路
- 1000.76 psi
标准
- 刹车
- 符合SAE J1473标准 & ISO 3450标准
卡特彼勒3306发动机
- 设计
The 毛毛虫 3306 engine has a four stroke cycle design for long, effective power strokes and more complete fuel consumption.
电梯机制/碗
- 表演
The two-speed elevator drive and high hydraulic horsepower provide maximum loading performance over a wide range of material conditions.
- 电梯的航班
电梯 flights break up the material during the loading and unloading process making the fill area workload reduced.
- 材料喷射
Retracting floor, bulldozer ejector and reversible elevator provide clean, quick material ejection.
- 碗的设计
The low-profile bowl design lets loaded material flow to the rear of the bowl letting the new material enter with less resistance.
- 前沿
The wide cutting edge allows a large volume of material to enter the bowl.
- 生产力
The angled top plate on ejector helps retain loads for maximum productivity and minimum haul road spillage.
- 耐久性和可靠性
The retractable floor is a roller mounted design that reduces the chance of binding.
- 可服务性
Segmented elevator drive sprockets allow exchange without removing the chain.
切削刃
- 设计
可逆性延长了寿命，降低了G.E.T. 成本.
运营商的隔间
- 可见性
The cutting edge enhances finish work capability and overall loading and dumping effectiveness.
- 座位
The multi-adjustable seat with air/hydraulic suspension offers shift-long comfort.
- 方向盘
The tilt/telescopic steering wheel enhances operational comfort and allows easier entrance and exit.
- 可操作性
The modulated, variable-flow steering makes maneuverability precise and low effort.
- 控制
The controls are easy to reach with low operational effort.
- 振动
The resiliently mounted engine and cab/canopy minimize vibration of the operator's compartment.
- 防侧翻结构（ROPS）
顶篷包含在标准布置中.
- 电子监控系统
The 电子监控系统 (EMS) has three stages of alert notifying the operator of varying degrees of required action to avoid possible damage or failure to components/systems.
可服务性
- 诊断连接器
The diagnostic connector (located in the cab) with the aid of a service tool, allows quick analysis of the starting and charging system.
- 布线
With the increasing use of electronics in today's machines, the quality of materials and design is having a greater effect on machine availability.
- 最后的驱动器
Outboard, planetary final drives can be removed independently of wheel mounting and brakes.
- 检查分
可以快速方便地获得液压压力.
- 地面通道
传动装置填充和检查, 液压充填和检查, manual fuel check (gauge in cab) fill and a majority of grease points can be obtained quickly and easily from ground level access.
- 维护
There's maintenance platform access to the engine oil check and fill, 检查发动机冷却液液位并注满, 前制动器贮油器, 液压系统滤清器和二次燃油滤清器.
客户支持
- 部分
Time spent waiting on your parts directly affects your bottom line!
- 服务
Whether in the dealer's fully equipped shop or in the field, trained service personnel using the latest technology and tooling will keep your equipment working.
- 组件
Exchange components for quick, yet 成本 effective repairs with minimal downtime.
- 机管理
猫 dealers help manage equipment investments with vehicle systems analysis to match the right machine to your job conditions and effective maintenance programs.
- 文学
丰富的操作和维护手册, parts manuals and other support information help you get the full value out of your equipment investment.
- /融资新葡京博彩官网
通过CAT财务或其他来源, your dealer can arrange attractive financing or leasing on the entire line of 猫 equipment.